Hunter Outdoor Ceiling Fan Remote Control Manual Português

This manual provides instructions on how to use the remote control for your Hunter outdoor ceiling fan. Please read and follow these instructions carefully to ensure safe and proper operation of your fan. ### Basic Operation 1.

Power On/Off:

Press the "Power" button to turn the fan on or off. 2.

Fan Speed:

Press the "Fan Speed" buttons to cycle through the fan's three speed settings: low, medium, and high. 3.

Light Control:

Press the "Light" button to turn the fan's light on or off. 4.

Dimming:

Press and hold the "Light" button to dim the fan's light to the desired brightness level. 5.

Reverse Function:

Press the "Reverse" button to change the direction of the fan's rotation. This helps to keep you cool in the summer and warm in the winter. ### Timer Function The remote control also features a timer function that allows you to set the fan to turn off automatically after a specified amount of time. 1. Press the "Timer" button to activate the timer. 2. Press the "-" and "+" buttons to adjust the timer setting. The minimum timer setting is 1 hour, and the maximum setting is 8 hours. 3. Press the "Timer" button again to confirm your setting. ### Pairing the Remote Control If you need to pair a new remote control with your fan, follow these steps: 1. Turn off the fan's power at the circuit breaker. 2. Remove the battery cover from the remote control. 3. Insert two AA batteries into the remote control, making sure to match the positive and negative terminals. 4. Put the battery cover back on the remote control. 5. Turn on the fan's power at the circuit breaker. 6. Press and hold the "Pair" button on the fan's receiver for 3 seconds. The receiver is located on the housing of the fan motor. 7. Press any button on the remote control within 30 seconds. The remote control will now be paired with the fan. ### Troubleshooting If you experience any problems with your Hunter outdoor ceiling fan remote control, try the following troubleshooting tips: * Check the batteries in the remote control and replace them if necessary. * Make sure the fan's receiver is properly connected to the fan motor. * If the remote control is not paired with the fan, follow the pairing instructions above. * Contact Hunter Customer Support for further assistance. ### Safety Precautions * Always turn off the fan's power at the circuit breaker before performing any maintenance or repairs. * Keep the remote control out of the reach of children. * Do not expose the remote control to water or excessive heat. * If you have any questions or concerns, please contact Hunter Customer Support for assistance.