How To Replace Sensor On Outdoor Light

Outdoor light sensors are an important part of any home security system. They can detect movement and turn on the lights to deter burglars and other criminals. If your outdoor light sensor is not working properly, it is important to replace it as soon as possible. Here is a guide on how to replace the sensor on an outdoor light.

Step 1: Turn off the power to the light.

This can be done by turning off the breaker or fuse that is connected to the light. If you are not sure which breaker or fuse to turn off, you can turn off the main power to the house.

Step 2: Remove the old sensor.

Most outdoor light sensors are mounted on the wall with screws. Use a screwdriver to remove the screws and then carefully pull the sensor off of the wall.

Step 3: Install the new sensor.

Place the new sensor on the wall and align the mounting holes. Use a screwdriver to insert the screws into the mounting holes and tighten them until the sensor is secure.

Step 4: Turn on the power to the light.

Once the new sensor is installed, turn on the breaker or fuse that is connected to the light. The light should now turn on when the sensor detects movement.

Step 5: Test the sensor.

To test the sensor, walk in front of the light. The light should turn on and stay on for a few minutes. If the light does not turn on, there may be a problem with the sensor or the wiring.

Replacing the sensor on an outdoor light is a simple task that can be completed in a few minutes. By following these steps, you can ensure that your outdoor light sensor is working properly and helping to protect your home.