Command Strips Outdoor Use

Command Strips: A Guide to Outdoor Use

Command Strips are a versatile and convenient way to hang items on walls and other surfaces without damaging them. But can you use them outdoors? The answer is yes, but there are a few things you need to keep in mind to ensure they perform optimally. Here's a comprehensive guide to using Command Strips outdoors:

Choosing the Right Strip:

Start by selecting a Command Strip designed for outdoor use. These strips are made with weather-resistant materials that can withstand extreme temperatures, moisture, and UV exposure. Regular Command Strips may not adhere properly or deteriorate quickly when exposed to the elements.

Surface Preparation:

Make sure the surface where you're applying the strip is clean, dry, and free of dust or debris. Use rubbing alcohol to remove any dirt or oils that may interfere with adhesion. Allow the surface to dry completely before applying the strip.

Strip Application:

Follow the instructions on the Command Strip packaging carefully. Apply the strip evenly and press it firmly onto the surface. Avoid stretching or twisting the strip. Use multiple strips for heavier items or when attaching to rough or uneven surfaces.

Cure Time:

Allow the strip to cure for 24 hours before hanging anything on it. This gives the adhesive time to bond properly with the surface. Do not exceed the weight limit specified on the strip packaging, as this may cause the strip to fail prematurely.

Extreme Temperatures:

While Command Strips are designed for outdoor use, they may not perform well in extreme temperatures. Avoid using them in areas that regularly experience temperatures below -20°F or above 120°F. Extreme heat can soften the adhesive, while extreme cold can make it brittle.

Moisture Resistance:

Outdoor Command Strips are water-resistant, but they are not waterproof. Avoid prolonged exposure to water or direct rainfall. If the strip gets wet, dry it thoroughly with a clean cloth. Note that submerging the strip in water will significantly reduce its effectiveness.

Removal:

To remove an Outdoor Command Strip, pull down on the tab slowly and steadily. Do not pull up, as this can damage the surface. If the tab breaks, use a butter knife or other thin object to gently pry the strip off the surface.

Tips:

Test the strip in an inconspicuous area first, especially if you're using it on a delicate or valuable surface.
Consider using additional support for heavier items, such as hooks or nails.
Inspect the strip periodically and replace it if it shows signs of wear or damage.
If you're hanging an item in a high-traffic area or on a surface that is frequently touched, use more strips for added security.

By following these guidelines, you can use Command Strips outdoors with confidence, knowing that they will provide a secure and damage-free way to hang your items, even in harsh weather conditions.

Command Outdoor Clear Assorted Refill Strips 3m United States