Philips Mygarden Robin Outdoor Led Wall Lantern With Motion Sensor Instructions

Philips MyGarden Robin Outdoor LED Wall Lantern with Motion Sensor Instructions

The Philips MyGarden Robin Outdoor LED Wall Lantern with Motion Sensor is a stylish and practical addition to any outdoor space. It provides bright, energy-efficient lighting and added security with its motion sensor. This guide will provide step-by-step instructions on how to install and operate your new lantern.

Step 1: Safety First

Before starting any electrical work, ensure that the power is turned off at the circuit breaker or fuse box. Wear appropriate safety gear, including gloves and safety glasses.

Step 2: Assembling the Wall Bracket

Remove the mounting bracket from the lantern and align it with the desired location on the wall. Use the screws provided to secure the bracket firmly.

Step 3: Installing the Lantern

Lift the lantern and hook it onto the mounted bracket. Ensure that it snaps into place securely.

Step 4: Wiring

Connect the wires from the lantern to the corresponding wires in the wall junction box: black to black, white to white, and bare ground wire to the ground screw.

Step 5: Motion Sensor Adjustment

Locate the motion sensor on the lantern and adjust the dials to set the desired sensitivity (range) and duration (time) of the light activation.

Step 6: Installing the Bulb

Unscrew the front lens of the lantern and insert the LED bulb provided. Ensure that the bulb is properly seated and tightened.

Step 7: Power Up

Turn on the power at the circuit breaker or fuse box. The lantern will start operating and the motion sensor will activate when it detects movement.

Step 8: Testing the Motion Sensor

Walk past the lantern to trigger the motion sensor. Observe that the light turns on and stays on for the duration set.

Additional Features

The Philips MyGarden Robin Outdoor LED Wall Lantern with Motion Sensor offers additional features:

Dusk-to-dawn sensor for automatic operation at night
Adjustable color temperature to match the surrounding environment
IP54 water resistance rating for durability in outdoor conditions

Troubleshooting

If the lantern does not operate as expected, refer to the following troubleshooting tips:

Check the power supply and wiring connections.
Adjust the motion sensor sensitivity and duration settings.
Replace the LED bulb if it is malfunctioning.

Conclusion

Congratulations on installing your Philips MyGarden Robin Outdoor LED Wall Lantern with Motion Sensor. It will provide years of reliable illumination and added security to your outdoor space.