How To Remove Outdoor Carpet Glued Concrete

Outdoor carpets can be a great way to add style and comfort to your patio or deck. However, when it comes time to replace your carpet, removing the old one can be a daunting task. If the carpet is glued to the concrete, the process can be even more difficult. But with the right tools and techniques, you can remove outdoor carpet glued to concrete without damaging the surface.

Materials Required:

Utility knife
Hammer
Chisel
Pry bar
Heat gun (optional)
Chemical carpet remover (optional)
Safety glasses

Instructions:

1. Safety First

Before you begin, put on safety glasses to protect your eyes from flying debris. If you are using a heat gun, make sure to follow the manufacturer's instructions to avoid burns.

2. Score the Carpet

Use a utility knife to score the carpet along the edges where it meets the concrete. This will help to weaken the bond between the carpet and the concrete.

3. Remove the Carpet

Starting at a corner, use a pry bar to gently pry up the carpet from the concrete. Work your way around the perimeter of the carpet, prying up small sections at a time.

4. Remove Excess Glue

Once the carpet is removed, you will need to remove any excess glue from the concrete. Use a hammer and chisel to carefully chip away the glue. You can also use a heat gun to soften the glue, making it easier to remove.

5. Chemical Carpet Remover (Optional)

If there is still glue residue on the concrete, you can use a chemical carpet remover to help remove it. Apply the remover to the concrete according to the manufacturer's instructions and allow it to sit for the recommended amount of time. Then, use a scrub brush to scrub away the softened glue.

6. Rinse and Clean

Once all of the glue has been removed, rinse the concrete with water to remove any remaining residue. Allow the concrete to dry completely before installing your new carpet.