How To Build An Outdoor Fire Pit With Pavers

How to Build an Outdoor Fire Pit With Pavers

Building an outdoor fire pit with pavers is a relatively simple DIY project that can be completed in a few hours. Plus, it's a great way to add warmth and ambiance to your backyard or patio.

Here's a step-by-step guide on how to build an outdoor fire pit with pavers:

1. Choose a Location

The first step is to choose a location for your fire pit. It should be in a safe area where it won't be near any flammable materials. Also, consider prevailing wind direction so the smoke won't blow towards neighbors or your house.

2. Dig a Hole

Once you've chosen a location, dig a hole that is about 12-18 inches deep and 24-36 inches in diameter. Be sure to make the hole wide enough to accommodate all of the stones for the fire pit.

3. Line the Hole

Line the hole with a layer of sand or gravel to prevent weeds from growing. This will also help to keep the fire pit from becoming a muddy mess when it rains.

4. Create a Base

Next, create a base for the fire pit using a layer of pavers. Start by placing a row of pavers around the perimeter of the hole, followed by a second row inside the first. Continue adding rows of pavers until the base is about 6 inches high.

5. Build the Walls

Once the base is complete, you can start building the walls of the fire pit. Stack the pavers in a staggered pattern, offsetting the joints from row to row. Continue stacking the pavers until the walls are about 12 inches high.

6. Cap the Walls

To finish the fire pit, cap the walls with a layer of pavers. Again, use a staggered pattern to offset the joints. Be sure to leave a small opening in the wall for airflow.